Efficient defoamer masterbatch is suitable for all kinds of enterprises using PE, PP recycled plastics for product production. The trace amount of moisture contained in raw materials has a very serious impact on the production of plastic products. Therefore, companies generally use the additional drying equipment to dry the plastics, which is a great waste of energy and manpower, and increases the cost of the product. With the use of the masterbatch, it is only necessary to add it to the raw material, and without any adjustment to the production process of the product, all problems such as bubbles, moiré, cracks, spots, etc. caused by moisture can be eliminated, and there is no adverse effect on the physical and mechanical properties of the product. Impact, save time, save electricity, increase production efficiency, and reduce costs. The masterbatch is non-toxic, odorless, non-corrosive and harmless to the human body.

    Usage: The masterbatch can be directly mixed with moisture-contaminated plastic raw materials and can be processed and produced. If used in blow molding production, the addition ratio is 1.0%-2.0%; if used in sheet and injection molding production, the addition ratio is 2%-5%; the specific addition ratio should be determined by the user according to the moisture situation of the plastic.

    Application: Widely used in film products, bag products, sheet products and injection molding products.

Technical Index: Test Item Index Appearance Greyish White Particles, Good Plasticization Density: (g/cm3) 1.5±0.1 Melt Flow Rate (g /10min) 15.0 to 25.0 volatile matter (%) 1.5±0.5

    Matters needing attention:

1. This masterbatch avoids moisture and moisture absorption before use;

2. It is better to use ingredients immediately before use;

3. Must not be heated and dried together with damp plastic to avoid poor quality during processing;

4. Check before unpacking. Whether the packaging is intact and the unused masterbatch is heat sealed as soon as possible.

    Storage conditions: Store in a clean, dry, cool, cool, clean place. Do not allow the damage and open storage of masterbatch packaging to avoid sun exposure and rain.

Qingyun Xinyang New Materials Co., Ltd.

Mr. Zhou

Email: sales1@xy-masterbatch.com

Tel: +86-0531-88995327